3Com OfficeConnect ADSL Wireless 54 Mbps 11g Firewall Router
This 3Com product has many functions: router, firewall, adsl modem, wireless access point, 4 port switch. 3Com chose to give two names to its products: a name for the market (as the long name in the title), which identifies the purpose of the product and is not changed when a new model replaces the older one, and a model name, a number which identifies the specific model.
The "ADSL" term in the name is particularly useful to specify that it's a adsl modem too, with a RJ-11 port that would connect the router directly to the phone line, through a RJ-11 cable, just like any adsl modem; in fact I found several routers that were capable of routing the adsl signal but were equipped with a RJ-45 port instead of a RJ-11 port: they were not DSL modems and needed to be connected to an external DSL modem. Checking the rear of the product, maybe on the user guide, can help making sure the router is a DSL modem too.
I will review two 3Com OfficeConnect ADSL Wireless 54 Mbps 11g Firewall Router models, the older 3CRWDR100A-72 and the newer 3CRWDR101A-75.
- Reliability and 3Com assistance
- Wireless trouble with 3CRWDR101A-75
- Wireless coverage
- Other features
- Missing features
Create a VPN to connect from an Android client to a home Windows XP server
If you want to connect to your home computer using rdp when you are not home and are connected to the internet, you have to open a port on your firewall; changing the standard rdp port on both your server and your firewall increases your security (or decreases your unsecurity); configuring a Virtual Private Network (VPN) increases your security even more, and you can close the rdp port on your firewall: in fact, when you connect your remote client to your vpn, your remote client comes inside your LAN so that you can remote access your server from inside the LAN.
- Configure server to create a VPN
- Configure router firewall for VPN passthrough
- Configure VPN on Windows clients
- Configure VPN on Android devices
License: freeware for private use
Author: Karl Maloszek
Size: 250 KBytes (114 KBytes installer)
Requirement: Windows with COM support
Panorado Flyer is a compact program that gathers GPS coordinates from Google Earth and writes them into images EXIF information.
Running Windows XP in Xen from its own partition
Some months ago I made some experiments with Xen and I succeeded to install and run Windows XP as a guest using Xen 3.0. In that case Windows was located in a single file and was installed through Xen. My purpose now is to make Xen running an already installed Windows from its own partition. Just to be more specific, this is my machine configuration:
- Ubuntu Dapper Drake 6.06 is located on a SATA disk, set as first boot disk
- Windows XP is located on a EIDE disk, set as second boot disk
- Dual boot is made by grub
I am coming from a bloody week of wrestling against packages, bugs and "make world"s trying to run Xen in Ubuntu 6.06 amd64 on an AM2 3800+ and to make a Windows XP Pro domU.
I searched on the web some resources that would explain how to run Windows on Xen and I found some very good tutorial that unfortunately don't fit exactly my configuration and my purpose. These are the sites I took as a basis for my setup:
- dom0 = Debian Sarge 3.1, domU = Debian Sarge, Xen 2.0.7 32 bit installed from binaries or source, paravirtualization
- dom0 = SUSE 10.1, domU = Win XP Pro, Xen 3.0.2, Intel VT hardware virtualization
- dom0 = Ubuntu 6.06, domU = Ubuntu, Xen 3.0.1 32 bit
- dom0 = Kubuntu Dapper Drake, domU = Win XP, Xen 3.0.2-2 32 bit, AMD SVM hardware virtualization
These are all the steps I did and the problems I encountered during this Calvary :-) (I come from Windows with a little linux/unix background):