Netgear AC750 Wifi Range Extender (EX3700)
Here is how I satisfied my need to have a LAN messaging program, not really to chat with other users on the same LAN, which I could do, but to copy and paste links or texts between a rdp client and a rdp server when copy and paste from/to clipboard does not work in rdp sessions, for instance with some Android rdp clients.
These are the programs I used:
- Openfire 3.9.3 on the "server" (which can be a simple Windows pc): a realtime collaboration server using XMPP/Jabber
- Miranda IM 0.10.23.0: a multi-protocol instant messaging client
- Xabber 0.9.30b: an Android Jabber client
Running Windows XP in Xen from its own partition
Some months ago I made some experiments with Xen and I succeeded to install and run Windows XP as a guest using Xen 3.0. In that case Windows was located in a single file and was installed through Xen. My purpose now is to make Xen running an already installed Windows from its own partition. Just to be more specific, this is my machine configuration:
- Ubuntu Dapper Drake 6.06 is located on a SATA disk, set as first boot disk
- Windows XP is located on a EIDE disk, set as second boot disk
- Dual boot is made by grub
Recover "Logical sector size is 0" with dd
A few hours ago while I was using my pc suddenly Windows froze completely (mouse was stuck and Ctrl+Alt+Del did nothing). It's not astonishing but I was quite surprised because such a freeze never happened since I began using Windows XP on my new pc.
The problem appeared at the reboot:
grub, the bootloader on /dev/sda, showed this error message:
At reboot I started Windows XP Recovery Console from the Windows CD and tried
CHKDSK.EXE, and this was the outcome:
I booted again linux to launch
fsckand see it fail:
Then I found the solution in ubuntu forum:
root@am2:/home/z24# dd if=/dev/hda1 of=/defmedia/bkup_fat32_hda1.img bs=512 count=2048000 conv=noerror,sync 2048000+0 records in 2048000+0 records out 1048576000 bytes (1.0 GB) copied, 43.61 seconds, 24.0 MB/s root@am2:/home/z24# dd if=/defmedia/bkup_fat32_hda1.img of=/home/z24/sector6.bin bs=512 count=1 skip=6 conv=noerror,sync 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.011544 seconds, 44.4 kB/s root@am2:/home/z24# dd if=/home/z24/sector6.bin of=/dev/hda1 bs=512 count=1 conv=noerror,sync,notrunc 1+0 records in 1+0 records out 512 bytes (512 B) copied, 0.030644 seconds, 16.7 kB/sExplanation:
- the first dd makes a backup of the first gigabyte of the Windows partition: I copied 1 GB only because I didn't have enough space on a ext2fs to backup all the 28 GB of /dev/hda1.
- the second dd extracts the sixth sector to a temporary file: as reported by Microsoft KB247575, "The backup FAT32 boot sector is located at sector 6 of the logical drive".
- the third
ddcopies the extracted sector 6 to sector 0 of /dev/hda1.
ddwas also checked with
mount. Thanks a lot to the ubuntuforums user Onlymee for his post!
Update 13.09.2008The same problem happened again today and gave me the opportunity to complete the series of error messages :)
The first, at boot time, was the same: Mounting the partition (
mount -t vfat /dev/sda1 /mnt):
dmesg | grep sda1But
fdisk -l /dev/sdashows the partition table.
fsck.vfat /dev/sda1(executed from Ubuntu 8.04 alternate cd) The solution was exactly the same: copy the sixth sector back to the first. And voilà, it booted.
Author: Josh Madison
Install: no (optional installer available)
Size: 560 KBytes (153 KBytes compressed)
Requirement: Windows 95 or later
Convert is a compact and simple unit conversion program: it converts distance, speed, pressure, temperature, time, volume, angle, area, mass, power, and many more measure units, and it allows to create custom conversions.
Install and boot Windows on a second hard disk
I have a SATA disk and a EIDE disk, I installed Linux on the SATA disk and now I want to install Windows on the EIDE disk.
Because Windows must be installed on the disk that boot first, I entered BIOS and changed the boot order as this:
Then I installed Windows on the EIDE disk.
I want to configure dual boot this way:
- default choice: Linux (booting from SATA disk)
- second choice: Windows (booting from EIDE disk)
/boot/grub/menu.list(on Ubuntu or Debian; if grub is not installed try apt-get install grub):
title WinXP map (hd0,0) (hd1,0) map (hd1,0) (hd0,0) rootnoverify (hd1,0) chainloader +1That means Windows believes the EIDE disk is the first and SATA is the second, so it's happy and if I reboot and choose WinXP from grub menu it starts.